Touch screen
If you chose to enter your password via the touch screen,
you can change the actual character by scrolling up and
down. You can validate the character by taping on it
(or sliding on the right) and remove it by taping on the
“back” icon (or sliding on the left). The character type can
be changed by taping directly on it. Once done, tap one
time shortly on the sentence “long press to save”.
Keyboard
If you chose to use the keyboard, you can change the
actual character by turning the knob. You can validate
the character by pressing on the knob and remove it by
pressing on the left button. The character type can be
changed through the right button. Once done, long press
on the knob to start the connexion.
Note: to go back to the previous screen, delete a
character when there is nothing in the password.
5. Message on the display: Connected successfully
6. Wait until the update is nished (can take few
minutes)
7. Message on the display: OTA updated successfully
ONE is ready and can be used with the Elinchrom Studio
and IOS App.
User manual ONE ELINCHROM — 25
To Next Page
Loading...
