Rev.04/17/2017 DR www.elitescreens.com 10
Edge trim Installation
Included is an ultra-thin black edge trim that provides an elegant bezel finish
1. Place the assembled frame on a flat and clean surface. The projection screen surface should be facing up.
a. As an option, Black Tape is supplied to cover any possible gaps between the pieces of the bezel trim. Align
the tape with the edge of the screen, as shown in Figure 1. Once properly aligned, apply the black tape to
the center of the top and bottom of the screen material.
Figure 1
Edge trim x 6 PCS
Screen Material
The black tape
Plastic corner sleeve x4pcs
To Next Page
Loading...
