Elite Screens AEON series User Manual

Rev.04/17/2017 DR www.elitescreens.com 1
Aeon Series
EDGE FREE® Fixed Frame Projection Screen
User’s Guide
Applies to all available screen materials: CineGrey 3D® EDGE FREE® and CineWhite® EDGE FREE®
Product Description: The Aeon Series is a fixed frame projection screen that uses Elite’s EDGE FREE® technology.
The EDGE FREE® design resembles a giant size flat panel TV display. The Aeon includes an ultra-thin trim as an
installation option to further enhance the frame appearance and absorb projector overshoot.
An optional LED
backlighting kit is available for added visual appearance.
Hardware and Parts List
Please make sure all parts listed below are included before installation.
A. Elbow joint x4 pcs B. Top/Bottom horizontal
fame x4 pcs
C. Left/Right vertical
frame x2 pcs
D. Center joints x2 pcs
E. Center Support bar x1-3 pcs F. Wall brackets x2-3 pcs G. M5x15 screw x24 pcs H. M5x50 screws and
anchor x6 pcs
(135”-150”x2pcs;
180”-200” x3pcs)
I. Rubber hammer x1 pc
J
. Screwdriver x1 pc K. Black Tape x1 bag L. Bezel trim x6 pcs
M. Corner Support Bar
(180”-200”) x4 pcs
N. Corner sleeve x4 pcs

Elite Screens AEON series Specifications

General

Screen Type	Fixed Frame
Viewing Angle	180 degrees
Frame Material	Aluminum
Frame Color	Black
Aspect Ratio	16:9
Material	CineWhite
Installation	Wall mount
Frame Width	0.47" / 12 mm
Available Sizes	84" - 150" (Diagonal)

Summary

Hardware and Parts List

Frame Assembly Instructions

Screen Material Installation Guide

Screen Material Removal Procedure

Support Bar Installation (Models < 135")

Support Bar Installation (Models Under 135")

Instructions for installing the center support bar on screens smaller than 135 inches.

Support Bar Installation (Models 135"-150")

Instructions for installing the center support bar on screens between 135 and 150 inches.

Support Bar Installation (Models >= 180")

Support Bar Installation (Models 180"-200")

Instructions for installing the center support bar on screens 180-200 inches.

Corner Support Bar Installation (Models 180"-200")

Instructions for installing corner support bars on 180-200 inch screens.

Installation Guidance for CineGrey 3D® ALR Screens

CineGrey 3D® ALR Screen Compatibility and Notes

Notes on projector compatibility and performance for CineGrey 3D® ALR screens.

Projector Alignment for ALR Screens

Guidance on projector positioning to achieve optimal viewing angles with ALR screens.

Installation Examples and Edge Trim Overview

Correct and Incorrect Installation Examples

Visual comparisons of proper and improper projector installation methods.

Introduction to Edge Trim Application

Overview of the ultra-thin black edge trim for enhancing screen appearance.

Detailed Edge Trim Installation

Applying and Securing Trim Strips

Step-by-step guide for applying trim pieces and securing them with corner sleeves.

Corner Sleeve Installation

Instructions for fitting corner sleeves to cover gaps and complete the trim.

Diagonal Size Note and Wall Mounting

Diagonal Size Adjustment with Trim

Note on how edge trim affects the diagonal screen size measurement.

Wall Mounting the Screen

Steps for locating installation points and mounting the screen using wall brackets.