Rev.04/17/2017 DR www.elitescreens.com 6
6. If the material is too loose or tight after adjusting all four corner sides, then you will need to reattach the material.
Please follow the steps below to properly remove the screen material from the frame. This procedure will ensure
prolonging the life of the screen material.
Screen Material Removal
1. Detach the velcro from the frame.
2. Gently pull back the material to release it from the velcro connections on the corners
Pull back the screen material from
the velcro connection along the
edges of the frame to detach it.
The key is to attach within the
middle sections of 1 and 2. Then
continue attaching the remaining
unattached areas.
Repeat the same steps on
remaining three sides in the
sequence A, B, C, and then D as
show below.
Attach in the following sequence: a-b-c-d
D
To Next Page
Loading...
