Elite Screens Evanesce Tab Tension B CineGrey 5D User Manual

JA09252018 1 www.elitescreens.com
Evanesce Tab-Tension B CineGrey 5D®
Recessed In-Ceiling Ambient Light Rejecting Projection Screen
User’s Guide
Congratulations on your new Evanesce Tab-Tension B CineGrey 5D purchase! The screen material included is
our award winning ISF Certified CineGrey 5D™ which is a front projection material, precisely formulated for
environments with minimal control over room lighting. It was designed to enhance picture brightness, offer
accurate color fidelity, and improve contrast levels. The CineGrey 5D™ is best for family rooms, educational
facilities, conference rooms, house of worship or any applications in which incident light is a factor.
In order for the CineGrey 5D™ to maintain its projection qualities and optimum performance please refer to the
list below for proper maintenance and cleaning.
• Use a dry microfiber cloth to remove dust from the screen’s surface.
• When cleaning, use a damp microfiber cloth with warm water to remove any marks.
• Never rub or apply pressure when cleaning the surface.
• Never attempt to use any solutions, chemicals or abrasive cleaners on the screen surface.
• In order to avoid damaging the screen, avoid touching it directly with your fingers, pens/pencils or any
other sharp or abrasive objects.
This Product is Designed for Integrators
This user manual is written for the comprehension of licensed professional
installers/integrators experienced in building and electrical wiring codes.
DIY “do -it-yourself” enthusiasts should consult a professional for assistance

Elite Screens Evanesce Tab Tension B CineGrey 5D Specifications

General

Brand	Elite Screens
Model	Evanesce Tab Tension B CineGrey 5D
Category	Projector Accessories
Language	English

Summary

Important Safety & Warning Precautions

Pre-Installation Steps

Essential preparatory steps before commencing screen installation, including unpacking and handling.

Hardware Parts List

Included Components

Identification and listing of all parts provided with the screen for installation.

Installation Guide

Minimum Space Requirements

Specifies the essential spatial clearance needed for screen installation.

Hanging Bracket Mounting

Detailed instructions for attaching ceiling hanging brackets.

Screen Installation and Finishing

Steps for hanging the screen and attaching end covers and caps.

Screen Operation

Control System Overview

Explanation of the screen's control system, including remote and wired options.

IR Remote Control Operation

Guide to operating the screen using the Infrared remote control.

RF Remote Control and Programming

Instructions for using and programming the Radio Frequency remote.

Extended IR Sensor and 5-12 Volt Trigger

Setup instructions for external sensors and projector trigger connections.

RS485 Diagram and Settings

Technical details for RS485 interface settings and control codes.

Screen Tension Adjustment

Procedure for adjusting the screen's tension for optimal performance.