Elite Screens Lunette 2 Series User Manual

2/3/2016 www.elitescreens.com1


Lunette 2 Series
Curved Fixed Frame Projection Screen
User’s Guide
Important Safety and Warning Precautions
Please follow these instructions carefully to ensure proper maintenance and safety with your Lunette
Series Fixed Frame Curved Screen
1. When hanging the screen up, please make sure that no other objects – such as power switches, outlets,
furniture, ladders, windows, etc., occupy the space designated for your Fixed-Frame screen.
2. Regardless if the screen is hung on or installed into the wall; make sure that the proper mounting anchors
are used and that the weight is supported appropriately by a strong and structurally sound surface just as any
large and heavy picture frame should.
(Please consult a home improvement specialist for the best advice on installation.)
3. Frame parts are made of high quality velour-surfaced aluminum and should be handled with care.
4. When not in use, cover the screen with a furniture sheet to protect it from dirt, grime, paint, or any other
impurities.
5. When cleaning, use a soft cloth moistened with warm water to remove any marks on the frame or screen
surface.
6. Never attempt to use any solutions, chemicals, or abrasive cleaners on the screen surface.
7. In order to avoid damaging the screen, avoid touching it directly with your fingers, writing tools, or any
other sharp or abrasive objects.
8. Spare parts should be placed out of reach of small children in accordance with household safety guidelines.
CAUTION:
The projection screen frame is made of high-quality aluminum alloy and should be handled with care.
Use a soft cloth with warm water to remove any spots on the screen material surface.
To avoid damaging the screen material, never attempt to use any solutions, chemicals, or abrasive
cleaners on the screen itself, and never attempt to touch the screen with your fingers or sharps/abrasive
objects.

Elite Screens Lunette 2 Series Specifications

General

Series	Lunette 2 Series
Screen Type	Fixed Frame
Aspect Ratio	16:9
Installation	Wall mount
Frame Material	Aluminum
Frame Color	Black
Screen Material	CineWhite
Viewing Angle	160 degrees
Frame Width	3.5 inches
Available Sizes	92", 100", 110", 120", 135", 150"

Summary

Important Safety and Warning Precautions

General Safety Instructions

Follow instructions carefully for proper maintenance and safety of the screen.

Handling and Cleaning Precautions

Handle frame parts with care, cover when not in use, and clean gently with a moist cloth.

Hardware and Parts List

Component Identification

Identifies all hardware and parts included with the projection screen for assembly.

Frame Assembly and Screen Material Installation

Assembling the Frame Structure

Connects frame parts using elbow joints and screws to form the basic structure.

Initial Screen Material Attachment

Lays out screen material and begins securing it to the frame using fix plates.

Securing Screen Corners and Edges

Details the sequence and method for attaching fix plates to secure the screen material corners and edges.

Completing Screen Material Attachment

Fastens the remaining fix plates to complete the screen material attachment process.

Black Backing for AcousticPro Models

Purpose and Installation

Explains the function of black backing and how it is secured using Velcro on fix plates.

Center Support Bar Installation

Inserting the Center Support Bar

Guides the insertion of the center support bar into the frame grooves for added stability and tension.

Wall Mount Bracket Installation

Upper Bracket Installation

Details how to install the upper wall bracket using specific screws and alignment on the base line.

Lower Bracket Installation

Explains the process of installing the lower wall bracket using base line data and screw locations.

Mounting the Frame to Brackets

Describes how to correctly mount the projection screen frame onto the installed wall brackets.