Rev. 032410-JA
www.elitescreens.com info@elitescreens.com
Note: Improperly bringing the screen up/down will damage the screen material or rolling system.
MAINTENANCE
Clean matte white screen material with a soft cloth and mild soap with water.
When not in use, retract screen in its housing to keep the screen material surface clean.
NOTE:
Regardless of mounting method, the screen should be securely supported so that vibration or even abusive
pulling on the viewing surface will not cause the case to work loose or fall. The installer must insure that the
fasteners used are of adequate strength and suitable for the mounting surface chosen.
Manual SRM Series Dimensions Table
Diagonal
Size/Aspect
Ratio
Bottom
Edge
Distance
(B4)
Screen
Material to
Weight Bar
Height (B3)
Screen
material
distance
to wall
(C1)
Diagonal
Size/Aspect
Ratio
Bottom
Edge
Distance
(B4)
Screen
Material to
Weight Bar
Height (B3)
Screen
material
distance
to wall
(C1)
*Measurement dimensions are intended as a reference only and subject to change without notice. Note: Data Error ±1"