EasyManua.ls Logo

Elitech RC-19 - User Manual

Elitech RC-19
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
12
Note: The picture is for reference only. Any discrepancy in future, please adhere to the final product.
Note: It is suggested storing the logger at room temperature before started.
The temperature data logger is mainly used for monitoring and logging temperature in storage and shipment of food and pharmaceucals, such as cooler
boxes, refrigerated trucks, containers, etc.
The logger can connect to a computer via its USB port and export a PDF report. It features an internal sensor and a CR2450 lithium baery with whole
protecon grade up to IP67. A barcode is prepared for scanning.
All the parameters are preconfigured before the logger leaves the factory. Some can be customized based on your needs.
Memory capacity: 16000 points at maximum. Actual record capacity may be different due to different log cycles.
Start delay: When the logger is started, it delays for a period of me to start logging. The delay me can be customized.
Alarm thresholds: Alarm zone can be set according to the alarm thresholds. The logger supports three upper limit and two lower limit.
Alarm delay: The logger does not alarm immediately when the temperature is within the alarm zone. It begins to alarm only when the alarm delay me elapses.
Single
Cumulave
The logger records the single me for connuous out-of-limit events
The data logger records the cumulave me of all the out-of-limit events
Alarm type:
Press and hold the buon for 5 seconds to
start logging. Green LED will flash 5 mes.
Peel off the barcode label for further use.
User Manual RC-19 Single-Use Temperature Data Logger
Overview
Illustraon
Technical Parameters
Parameter Instrucons
Operang Instrucons
Back Front
Temperature measuring range: -30~70 Resoluon: 0.1
Alarm threshold: default (customizable)
Storage temperature: -30~70
Data interface: USB2.0
Temperature accuracy: 0.5/0.9(-20~40); 1/1.8(others)
Report type: PDF format
Sensor type: internal NTC
Baery: built-in CR2450 wide temperature lithium baery
Memory capacity: 16000 points (MAX)
Baery life: 2 years
(stored and used under normal temperature environment)
Log cycle: 6, 15, 30, 60, 90, 120, 180days (customizable)
Protecon grade: IP67
Size: 80mm (L) x 48mm (W) x 5.8mm (H)
Alarm type: single or cumulave
Weight: approx. 15g
S/N:EF216A100001
H3 The range of value greater than H3 is the super high temperature alarm zone 3
H2 The range of value greater than H2 is the super high temperature alarm zone 2
H1 The range of value greater than H1 is the super high temperature alarm zone 1
L1 The range of value less than L1 is the super low temperature alarm zone 1
L2 The range of value less than L2 is the super low temperature alarm zone 2
Configuraon Info
LED indicator
Barcode label
S/N:EF216A100001
Buon(Start/Status/Mark/Stop)
Waterproof plasc bag
USB port
Start/Stop Info
Mark Info
Status Request
Paste Area
Question and Answer IconNeed help?

Do you have a question about the Elitech RC-19 and is the answer not in the manual?

Elitech RC-19 Specifications

General IconGeneral
BrandElitech
ModelRC-19
CategoryData Loggers
LanguageEnglish

Related product manuals