RC-
RC-RC-
RC-5 USB Temperature Data Logger Operation Instruction
I. Product overview:
This data logger is mainly used for temperature recording during storage and
transportation of foodstuff, medicine, chemicals and other products, especially widely
used in all links of warehousing, logistics and cold chain, such as refrigerated
containers, refrigerated trucks, refrigerated package, cold storage, laboratory, etc.
II.Specification:
Product size: 80mm (length) X 25mm (width) X 12 mm (height)
III.Technical parameters:
1. Temperature unit: ℃ or ℉ optional
2. Temperature measuring range: -30℃~+70℃
3. Accuracy:
±0.5℃(-20℃~+40℃);Others,
+1℃;
4. Resolution:0.1℃;
5. Record capacity: 32000points(MAX);
6. Record interval:10s~24hour adjustable;
7. Sensor: Internal NTC thermal resistor;
8. Communication interface:USB interface;
9. Power supply:inner wide temperature CR2032 battery or power supply via USB
interface;
10. Battery life: in normal temperature, if the record interval sets as 15 minutes, it
could be used half a year.
IV.Initial use:
1. Install RC-5 temperature data logger data management software.
2. Connect RC-5 with computer via USB, and install USB driver according to the
Installation Tips.
3. Open RC-5 temperature data logger data management software, click the
connection icon in the tool bar. After checking the connection information, exit
from connection interface.
4. Click the parameters setting icon in the tool bar
.
After finish the parameters
setting, click "save" button to save all the parameters and exit from parameter setting
interface.
5. Exit from RC-5 temperature data logger data management software.
V.Data access
The recorded data information could be accessed from the temperature data logger.
And this process will not clear the historical memory or stop record process if it is in
the record status.
1. Connect the data logger with computer via USB interface, after successfully
connection, the icon shown in the LCD of data logger will light.
2. Open RC-5 temperature data logger data management software, click the