Need help?Do you have a question about the Elitech RC-5+ and is the answer not in the manual?
General| Temperature Range | -30°C to +70°C |
|---|---|
| Resolution | 0.1°C |
| Interface | USB |
| Sensor | Internal NTC thermistor |
| Protection Class | IP67 |
| Accuracy | ±0.5°C |
| Battery Life | Up to 2 years |
| Power Supply | CR2032 battery |
| Memory Capacity | 32, 000 points |
| Recording Interval | 10 seconds to 24 hours |
Connect the data logger to a computer to set configuration parameters.
Start recording by holding the left key; mark events by clicking the right key twice.
Press and hold the right key for 5 seconds to stop the recording process.
Open the generated data report on your computer or use management software.
Details on immediate start, timing start, and temporary report functions.
Operation and functions of the left key, including starting recording.
Operation and functions of the right key, including stopping recording and marking events.
Step-by-step instructions for replacing the device's battery using a coin.
Explanation of icons, status indicators, and readings shown on the LCD screen.
Instructions for navigating the device's LCD menu using the control keys.
To Next Page
