Need help?Do you have a question about the Elitech STC-1000WiFi TH and is the answer not in the manual?
General| WiFi Connectivity | Yes |
|---|---|
| Display | LCD |
| Temperature Measuring Accuracy | ±0.5 °C |
| Resolution | 0.1 °C |
| Relay Output Capacity | 10A/250VAC |
| Humidity Measuring Accuracy | ±3 %RH |
| Humidity Resolution | 1 %RH |
| App Control | Yes |
| Weight | 200 g |
| Certification | CE, RoHS |
| Temperature Range | -50°C to 99°C |
| Humidity Range | 0 to 100 %RH |
| Output Type | Relay |
| Sensor Type | NTC |
| Operating Environment | -20°C to 60°C, 20% to 85% RH |
Lists temperature and humidity parameters, setting ranges, and default values.
Instructions on how to properly plug in the temperature and humidity sensor probe.
Guide on how to enter and adjust controller parameters using the buttons.
Explains temperature control modes (cooling/heating) and differential settings.
Explains humidity control modes (dehumidifying/humidifying) and differential settings.
Step-by-step guide to connect the controller to the Elitech mobile application.
To Next Page
