Need help?Do you have a question about the Elitech STC-1000Pro TH and is the answer not in the manual?
General| Brand | Elitech |
|---|---|
| Model | STC-1000Pro TH |
| Category | Controller |
| Language | English |
Explains the meaning of various icons displayed on the LCD screen.
Details parameters for temperature control and settings.
Describes how to operate the controller using its buttons in different modes.
Warns about potential damage from incorrect operation and advises reading procedures.
Explains how to properly plug in the sensor probe to avoid errors.
Guides on how to navigate and set various parameters using the buttons.
Explains cooling and heating modes based on temperature set values and differentials.
Describes the protection time requirement for the temperature socket.
Details how high and low temperature alarms are triggered and indicated.
Explains humidity control modes based on set values and differentials.
Describes how high and low humidity alarms function and are indicated.
Provides instructions on how to install the equipment using hanging methods.
Lists error codes, their causes (like sensor failure, alarms), and their effect on output sockets.
Explains how to reset the controller to its original factory default settings.
Details how to reconfigure Wi-Fi settings for the STC-1000WiFi TH model.
Lists important prerequisites for using the Wi-Fi function and app.
Provides step-by-step instructions for connecting the device to the Elitech iCold mobile application.
Lists technical specifications including voltage, ranges, accuracy, and dimensions.
To Next Page
