To Next PageTo Next Page
Need help?Do you have a question about the Elka T 3000 and is the answer not in the manual?
General| Brand | Elka |
|---|---|
| Model | T 3000 |
| Category | Automatic Barriers |
| Language | English |
Provides essential information for safe and correct operation of the barrier.
Explains safety symbols used in the manual to prevent accidents and damage.
Details copyright protection for the manual and its content.
Specifies the document's use as an installation instruction for partly completed machinery.
Outlines general safety regulations and standards to be observed during installation and operation.
Provides crucial safety guidelines for users and persons near the barrier during operation.
Details safety precautions when using radio remote controls for barrier operation.
Defines the barrier's intended purpose for passage control of vehicle paths.
Highlights hazards associated with the barrier's moving parts during operation.
Warns about the risks and consequences of unauthorized modifications to the barrier.
Specifies the necessary qualifications and expertise for personnel handling the barrier.
Lists essential personal protective equipment (PPE) required for installation and maintenance.
Details the procedure for inspecting the shipment for transportation damage upon receipt.
Lists the components included in the barrier system package.
Provides guidelines for proper storage of the barrier to prevent damage.
Offers safety advice and procedures for lifting the barrier to prevent injuries.
Provides essential installation details for the barrier as a partly completed machinery.
States that the complete system must have an EC declaration of conformity after installation.
Informs about the location of the barrier's name plate.
Lists the necessary tools required for the installation of the barrier.
Provides detailed diagrams and measurements for barrier mounting and foundation.
Specifies requirements and basic guidelines for creating a stable foundation for the barrier.
Explains the procedure for safely opening and closing the barrier's housing.
Details the installation and mounting of the boom connector on the main shaft.
Describes how to convert the barrier from right-side to left-side boom mounting.
Guides the installation of the barrier boom onto the boom connector.
Explains how to mount and adjust balancing springs for proper boom operation.
Details the factory settings and adjustment options for barrier opening and closing times.
Provides an overview and identification of components within the terminal row.
Details the safe connection of the barrier to the mains power supply.
Explains the wiring and connection of various control inputs to the controller terminals.
Presents the electrical circuit diagram for the barrier system.
