T 3000 - T 350
2.4 Intended use – Vehicle traffic
The operational safety can only be ensured when the barrier is used as
intended.
After installation, the barriers of the series T 3000-3500 serve as passage
control of vehicle paths.
CAUTION!
Danger of impact and crushing!
With inadequate safety measures the movement of the barrier boom can
result in impact or crushing points between the boom and solid objects within
the movement area.
In order to reduce the potential danger during the barrier boom movement,
additional optical and/or acoustic warning devices should be installed.
The controller is a product component and serves to control the barrier.
Any use above and beyond the above mentioned use is prohibited and
constitutes improper use.
2.5 Danger, which could emanate from the site of operation
The barriers T 3000-3500 operate with moving parts.
WARNING!
Rotating and/or linear movable components can cause serious injuries.
Do not reach into moving parts or handle any moving components during
operation.
Turn the appliance off before any maintenance work, repair work or other
work and secure it against unintentional restarting.
2.6 Non-factory technical alterations and extensions
Non-factory technical alterations and/or extensions may result in hazards as
well as interfere with the function of the barrier.
DANGER!
Danger through voltage!
Risk of death by electric shock!
Technical alterations may only be performed by skilled personnel and only
according to the manufacturer’s instructions.
CAUTION!
Danger of injury through defective components!
Mechanical and electrical alterations can influence the functioning of the
barrier!
Technical alterations may only be performed by skilled personnel and only
according to the manufacturer’s instructions.
To Next Page
Loading...
Need help?
General