Owner’s Manual
Kickstand Operation
C-Series and Models 8S and 11R
These ElliptiGO® products are equipped with a very
stable double leg kickstand. To operate the kickstand,
follow these steps:
1. Retracting the Kickstand - To retract the
kickstand grab the steering column with one hand
and the frame member which goes over the
top of the wheel with the other hand. Lift
the back of the frame while kicking the kickstand in
the rearward direction.
2. Extending the Kickstand - To extend the
kickstand grab the steering column with one
hand and the frame member which goes over the
top of the wheel with the other hand. Lift the back
of the frame while kicking the kickstand in the
forward direction.
ALERT! Do not stand on bike with the kickstand
extended. Standing on the bike with the kickstand
extended can cause a fall or damage your frame and
kickstand, voiding your warranty.
1
2
To Next Page
Loading...
