Owner’s Manual
The Storage Position
To place the folding steering column
into the storage position, follow these
steps:
1. Open both collar quick releases.
2. Rotate collar 90 degrees counter-
clockwise until index mark on collar
lines up with “OPEN” mark on base.
3. Slide collar up above folding pivot.
4. Fold the steering column inward
toward the center of the bike 90
degrees.
5. Slide the collar back so the groove
on the collar engages the steering
base.
6. While holding the collar tight
against the steering base,
close both collar quick-releases
to lock into the storage position.
1
2 3
4
5
6
To Next Page
Loading...
