Read these instructions carefully before use and keep it for future references.
The installation and the adjustment of the ventilator can only be done by competent persons, trained to work with electric
systems up to 1000V, who have read the given instructions for installation, adjustment and use.
Characteristics of the power network to which the device is connected have to be within norms (standards) and effective
regulations. The electrical installation must feature a device for the automatic protection of network. The appliance needs
to be connected through phase switch with at least 3 mm distance between contacts. Check before the installation whether
the parts of the ventilator (propeller, ventilator body and mask) are without signs of damage, and, in particular, that there
are no small objects in the operating part of the ventilator (area of rotation of propeller blades), which could damage the
blades. The device must not be used for the purposes for which it is not intended and any modifications or changes are
strictly prohibited.
This appliance is not intended for use by children or persons with impaired physical, mental or sensory abilities, or by
persons with insufficient knowledge and experience, unless they are supervised by a person responsible for their safety or
have been given instructions for safe use of the appliance. Children must be under supervision of adults in order to prevent
playing with the appliance. Also, cleaning and user maintenance must not be carried out by children under the age of 8 and
without supervision.
If joint exhaust outlet is used, it is necessary to take measures to prevent permeating of smoke, unburnt gases and other
combution products. Possibility of reverse flow of gases from appliances using gas or open flame needs to be eliminated.
The air that is taken out of the premise must contain no dust or other solid particles, as well as sticky substances and
fibrous materials. The appliance must not be used in the premises with flammable substances or evaporations (such as
petrol, benzene, inscticides etc.).
The appliance should not be covered and fresh air flow should not be obstructed. Air flow through the openings in the mask
to the operating part of the ventilator should be optimal in order to secure the parameters and the stated technical
characteristics. Also, sitting on the appliance or putting objects on it is not allowed.
At the end of its working life, the appliance is subject to source-separated collection of electric
waste!
Do not dispose of the appliance together with communal waste!
IMPORTANT!
The owner of the appliance is obliged to comply with these instructions!
To Next Page
Loading...