Why does the bobbin thread keep breaking on my ELNA 3210 Sewing Machine?
The bobbin thread can break if it is not threaded correctly in the bobbin holder or if lint has collected in the bobbin holder. If the bobbin is damaged and does not turn smoothly, replace bobbin.
Why isn't the fabric feeding smoothly through my ELNA 3210 Sewing Machine?
If the fabric isn't feeding smoothly, it could be due to: * The feed dog being packed with lint. * The pressure foot dial not being set correctly. * The stitches being too short. * The correct presser foot not being used. * The feed dog being lowered.
What to do if my ELNA 3210 Sewing Machine doesn't work?
If your machine isn't working, check if: * The machine is not plugged in. * A thread is caught in the hook area. * The bobbin winder spindle is in the winding position.
What to do if the seam puckers when using my ELNA 3210 Sewing Machine?
Seam puckering can occur if the needle thread tension is too tight, the machine is not threaded correctly, the needle is too large for the fabric, the stitch length is too long for the fabric, or the foot pressure dial is not set correctly. For lightweight fabrics, threads may have been caught in the hook area, so place a lightweight tearaway stabilizer under the fabric.
Why are the stitches forming loops underneath the fabric with my ELNA Sewing Machine?
Loops forming underneath the fabric can be caused by the needle thread tension being too loose, or the needle being either too large or too small for the thread.
Why does the needle thread keep breaking on my ELNA 3210?
The needle thread may break due to several reasons: * The needle is not threaded properly. * The needle thread tension is too tight. * The needle is bent or blunt. * The needle is not inserted correctly. * The thread is either too heavy or too fine for the needle. * The threads are not under the presser foot when sewing begins.
Why is my ELNA Sewing Machine skipping stitches?
Skipped stitches can occur for several reasons: * The needle is not inserted correctly. * The needle is bent or blunt. * The needle and/or the thread are not suitable for the fabric being sewn. * A stretch needle is not being used for sewing stretch, very fine and synthetic fabrics. * The needle thread is not threaded properly.
What causes the bobbin thread to break on my ELNA 3210?
The bobbin thread may break because: * The bobbin thread is not threaded correctly in the bobbin holder. * Lint has collected in the bobbin holder. * The bobbin is damaged and does not turn smoothly. If this is the case, replace the bobbin.
Why is the seam puckering when I sew with my ELNA 3210 Sewing Machine?
Seam puckering can occur if: * The needle thread tension is too tight. * The machine is not threaded correctly. * The needle is too large for the fabric being sewn. * The stitch length is too long for the fabric. * The foot pressure dial is not set correctly. * Threads have been caught in the hook area.
Why are loops forming underneath the fabric with my ELNA 3210?
Loops may form underneath the fabric if: * The needle thread tension is too loose. * The needle is either too large or too small for the thread.
General| Brand | ELNA |
|---|---|
| Model | 3210 |
| Category | Sewing Machine |
| Language | English |
To Next Page
