Need help?Do you have a question about the ELNA 320 and is the answer not in the manual?
General| Brand | ELNA |
|---|---|
| Model | 320 |
| Category | Sewing Machine |
| Language | English |
Procedures for removing and attaching the face plate.
Procedures for removing and attaching the base cover.
Procedures for removing and attaching the front cover.
Procedures for removing and attaching the rear cover.
Procedure to check and adjust needle bar height.
Procedure to adjust presser foot height and alignment.
Procedure to adjust needle swing.
Procedure to adjust needle drop position.
Procedure to adjust needle to hook timing.
Procedure to adjust needle bar height.
Procedure to adjust clearance between needle and hook point.
Procedure to adjust backlash between hook drive gear and lower shaft gear.
Procedure to adjust feed dog height.
Procedure to adjust feed balance.
Procedure to adjust buttonhole feed balance.
Procedure to adjust buttonhole zero feed.
Procedure to adjust fabric feed for bartacks during buttonhole sewing.
Steps for removing and installing the motor.
Procedure to adjust motor belt tension.
Steps for removing and installing the threader.
Procedure to adjust the threader mechanism.
To Next Page
