43
Other buttonholes
B3 Round end and B4 fine fabric buttonholes
The sewing procedure is the same as that of B1 sensor
(square) buttonhole (refer to page 38-39).
NOTE:
The opening width can be adjusted from 0.2 to 2.0.
The buttonhole width can be adjusted from 2.6 to 5.4.
The stitch density can be adjusted from 0.30 to 1.00.
B5 Keyhole buttonhole
The sewing procedure is the same as B1 sensor (square)
buttonhole (refer to page 38-39).
Use an eyelet punch to open the keyhole buttonhole.
NOTE:
The opening width can be adjusted from 0.2 to 2.0.
The buttonhole width can be adjusted from 5.6 to 7.0.
The stitch density can be adjusted from 0.30 to 1.00.
B6 Stretch buttonhole
The sewing procedure is the same as B1 sensor (square)
buttonhole (refer to page 38-39).
The sewing steps are as shown.
NOTE:
The opening width can be adjusted from 0.2 to 2.0.
The buttonhole width can be adjusted from 2.6 to 7.0.
The stitch density can be adjusted from 0.50 to 1.00.
To Next Page