Need help?Do you have a question about the ELNA PRO 704 DEX and is the answer not in the manual?
General| Type | Electronic |
|---|---|
| LCD Screen | Yes |
| Maximum Stitch Length | 5 mm |
| Free Arm | Yes |
| Needle Threader | Automatic |
Safety precautions to reduce the risk of electric shock.
Safety precautions to reduce risks of burns, fire, shock, and injury.
Reminder to keep safety instructions for future reference.
Safety precautions specific to the US market, including polarized plug details.
Identifies and labels the main parts of the sewing machine with diagrams.
Details parts located in the side door area of the machine.
Details parts located in the front door area of the machine.
Lists accessories found in the box, side door, and on the machine.
Details the three outstanding safety features of the PRO 704 DEX.
Step-by-step guide for initial machine setup, including plug, antenna, and pads.
Recommendation for using EL x 705 needles for optimal sewing results.
Instructions on how to remove and attach the presser foot.
Information about the needle threader for easy threading.
Procedure for installing needles, including flywheel alignment and needle placement.
Explains the 4 different threading routes for various stitch programs.
Instructions for threading the lower looper.
Instructions for threading the chain looper.
Guides users through machine operations based on screen instructions.
How to use the power switch to turn the motor and light on and off.
How to change sewing programs using the selection knob.
How to adjust stitch length according to fabric and program.
How to adjust differential feed for various fabric types.
Instructions for engaging and disengaging the rolled/narrow hem device.
How to disengage and engage the upper looper release lever.
Procedures for attaching and removing the 2-thread converter.
Steps to remove the overlock cover for access or cleaning.
How to attach the sewing table to the machine.
How to engage, disengage, and adjust the moving blade.
How to set presser foot positions, lift, and adjust pressure.
Explains the indicators and information shown on the sewing program display.
Instructions for starting sewing after machine setup and program selection.
How to perform a basic chainstitch and important notes.
How to create a thread chain at the end of fabric for finishing.
How to perform a cover hem stitch, including tension release.
How to use the back-tack device to secure overlock seams.
Using snap-on thread guides and tension clips for decorative thread sewing.
Fitting the waste tray for a tidy workspace.
How to adjust thread tensions based on thread types and fabric.
Achieving balanced tension for 4-thread stitches and troubleshooting loose threads.
Achieving balanced chainstitch tension and troubleshooting loose needle thread.
Achieving balanced cover hem tension and troubleshooting needle thread issues.
Achieving balanced overcast stitch tension and troubleshooting loose needle thread.
How to adjust stitch length (S.L.) and differential feed (DIFF.F.) based on fabric.
Adjusting stitch length from 0.5 to 4, lower for sheer, higher for thick fabrics.
Using the differential feed control slide for fabric feeding adjustments.
How to adjust the cutting width for different fabric types.
Adjusting cutting width by moving the blade left or right.
How to lock the moving blade for sewing extra heavy fabrics.
How to turn corners without cutting the thread, leaving thread loops.
How to overlock inside corners, including clipping and folding fabric.
Technique for guiding fabric gently around inside and outside curves.
Method for easily removing stitches by snipping and pulling threads.
How to create decorative topstitching using the flatlock stitch.
How to join fabric edges for a patchwork effect.
How to create pin-tucks by folding and sewing fabric along a line.
How to perform quilting using the chainstitch and quilting guide.
General advice on properly maintaining the sewing machine.
Instructions for oiling specific points on the machine.
How to clean dust and lint from various machine parts.
How to clean dust and lint around the presser foot.
How to clean dust and lint around the feed dogs.
How to clean the moving and fixed blades.
Steps to replace the machine's light bulb.
Procedure for replacing the moving blade, including locking and removal.
Common causes and solutions for irregular or skipped stitches.
Common causes and solutions for thread breakage.
Troubleshooting chainstitch thread breakage.
Causes and solutions for a noisy sewing machine.
Causes and solutions for fabric puckering during sewing.
Causes and solutions for needle breakage.
Causes and solutions for the sewing machine jamming.
To Next Page
