User Manual: Interactive Digital Signage
SW602296 Rev D, Page 16 of 34
On-Screen Display (OSD) (Optional Elo Part Number: E483757)
Connected Through the RJ45 Connection
Five OSD buttons can be found on the OSD remote. There is an LED light which shows the
current state of the monitor. The following are the functions that relate to the designated button.
Note: Opening the OSD menu from the remote will disable the touch functions on the OSD
menu.
The buttons and their functionality are:
Function when OSD is not displayed:
Function when OSD is displayed:
Return to previous OSD menu
Hot key for changing video source*
Increase value of selected parameter /
select next menu item
Toggles the power status of the monitor
*The hot key allows the user to quickly change the input video source. If the user accidently
presses this key, they can quickly press the Menu button to cancel a video source change.
Using the OSD buttons controls an on-screen graphical user interface which displays on top of
your input video, allowing intuitive adjustment of the following display parameters:
To Next Page
Loading...
