User Manual: Interactive Digital Signage
SW602296 Rev D, Page 22 of 34
Wake-On-Touch
The touch display supports wake-on-touch functionality when the PC is in sleep mode. To enable this,
please ensure that the BIOS settings have enabled USB support during the S4 sleep cycle.
If you still are having trouble with Wake on Touch, please download the latest Elo drivers to allow the
touch display to use this function. Refer to Chapter 3, Section “Installing the IDS Touchscreen
Technology Software Drivers” to find instructions to download the latest touch drivers.
Driver Installation
Elo Computer Modules (Windows 7, Windows 8.1, and Windows 10 models), have all required
drivers preinstalled.
All required drivers are available online at www.elotouch.com.
For No Operating System (OS) units, the drivers are available online at www.elotouch.com.
To Next Page
Loading...
