What to do if my Elo TouchSystems Monitor displays 'Out of Range'?
If your Elo TouchSystems Monitor displays an “Out of Range” message, it means that your computer's resolution is set higher than what the LCD display can handle. Check your computer's resolution and reconfigure it to be less than or equal to 1280x1024.
Why is my Elo TouchSystems Monitor not responding after turning it on?
If your Elo TouchSystems Monitor isn't responding after you turn on the system, ensure that the monitor’s Power Switch is on. Also, turn off the power and verify that the monitor’s power cord and signal cable are properly connected.
What to do if Elo TouchSystems Monitor screen is blank?
If the screen of your Elo TouchSystems Monitor is blank, it might be due to the Power Saving feature automatically turning off the screen. Press any key to see if the screen reappears. You can also adjust the brightness.
How to fix touch function on Elo TouchSystems Monitor?
If the touch function isn't working on your Elo TouchSystems Monitor, ensure that the touch cable is securely attached at both ends.
What to do if Elo TouchSystems Monitor screen flashes when initialized?
If your Elo TouchSystems Monitor screen flashes when initialized, turn the monitor off and then turn it on again.
General| Screen Size | 17 inches |
|---|---|
| Display Type | LCD |
| Resolution | 1280 x 1024 |
| Aspect Ratio | 5:4 |
| Brightness | 250 cd/m² |
| Response Time | 5 ms |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Touch Technology | AccuTouch |
| Input Connectors | VGA, USB |
| Connectivity | USB |
| Power Consumption | 30 W |
| Mounting Options | VESA mount compatible |
| Dimensions | 370mm x 370mm x 70mm |
To Next Page
