Need help?Do you have a question about the ELPRO Libero Cx and is the answer not in the manual?
General| Brand | ELPRO |
|---|---|
| Model | Libero Cx |
| Category | Data Loggers |
| Language | English |
Warns about gas explosion risk from battery heating and not throwing into fire.
Details battery type (lithium, manganese dioxide) and shipping declaration.
Warns about deformation from IR/steam, battery explosion with microwaves, and X-rays.
Introduces liberoCONFIG for setting parameters, creating profiles, and using SmartStart Pack & Go.
Illustrates the workflow from liberoCONFIG to SmartStart Pack & Go (.exe) files.
Shows available LIBERO devices connected to the software.
Explains profiles as setup sets for monitoring tasks, saved as .LiberoCFG files.
Introduces the chapter detailing the step-by-step configuration process.
Setting the logging interval and viewing the device's operational duration.
Configuring a delay before the first measurement is taken.
Illustrates how alarms are triggered by exceeding or falling below threshold values.
Describes available alarm modes: Single alarm zone and Multi alarm zone.
Details configuring a single high and single low alarm zone for LIBERO CB.
Configuring up to 8 independent alarm zones (H1-H4, G, L1-L3).
Setting product-specific MKT activation energy.
Enabling MKT alarm and setting upper/lower MKT limits.
Enabling duration alarm to trigger independently of other criteria.
Setting a threshold for logging time to trigger an alarm.
Setting the time zone used in the PDF report, based on UTC.
Options for automatically zooming or using preset scales for the chart's Y-axis.
Options to hide specific elements like alarms, logging results, or the chart from the PDF report.
Sets a minimum time the LIBERO must log before it can be stopped.
Disables the physical stop button, requiring USB connection to stop logging.
Explains configuration and data access passwords for security.
Details temperature and electrical calibration tests, lot acceptance tests, and results.
Steps to select and check PDF files for integrity.
Creates a report detailing the check results for selected LIBERO Cx.
Bulk configuration without software installation via .exe files.
Process of creating .exe files with profiles and shipment information.
Automatic report of LIBERO IDs, profiles, and entered information.
Shows the main window for setting title, color, start mode, passwords, and info fields.
Optional report documenting all SmartStart configurations.
Accesses functions to build the executable file.
Creates an executable file for LIBERO configuration without installation.
Outlines the steps for defining profiles, creating the .exe, and sending it.
Displays predefined settings, color, and title from the .exe.
Emphasizes that the checksum must match the configuration profile.
Shows the progress of sending the profile to the LIBERO via USB.
Window for entering variable PDF report information via keyboard or barcode.
Explains how to enter data and identifies mandatory fields.
How to select a different profile from the list in the SmartStart window.
Shows example error messages when configuration fails.
Lists reasons for errors like profile incompatibility or disconnection.
To Next Page
