EasyManua.ls Logo

ELRO DV477W - 6 Specifications; 7 Safety Instructions

ELRO DV477W
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 11 -
6. Specifications
MONITOR
800(H)*3RGB*480(V)
18 cm (7")
40 seconds
120 seconds
In rest ≤ 4.5W,
Operating State ≤ 9.5W
Input AC100-240V
Output DC12V, 2A, 24W
15 m; 4 x 0,2 mm
214 x 152 x 17 mm
16
BUITENUNIT
700 TV lines
60° horizontal
45° vertical
-10°C ~50°C
10%~90%(RH)
6 x white light led's, 2 meters
122 x 206 x 79 mm
7. Safety instructions
Do not install the equipment in an environment of high temperature or high humidity.
Do not place the equipment near televisions, as signals from televisions and the intercom
may interfere with each other.
Do not touch the equipment with wet hands.
Do not throw, drop, or otherwise damage the equipment.
Clean the equipment with a soft cloth. Do not use any polish, thinner, or caustic agents.
Do not expose the camera to direct sunlight.
Use the product in a situation where there is no interference.
When a car or motorcycle passes by, the image may become blurred or disappear due to
interference from radio waves.
Note:
To prevent damage, install the devices according to the instructions.
Place the AC adapter in an accessible location where it can be disconnected.
Use the supplied cables.

Related product manuals