Need help?Do you have a question about the ELSEC 764 and is the answer not in the manual?
The blue Set button accesses advanced functions and unit changes for the device.
Details UV measurement units like µW/lumen and mW/M², with recommended museum levels.
Covers visible light readings in Lux or Foot-candles and suggested museum light levels.
Explains temperature measurements in Centigrade or Fahrenheit.
Defines humidity as %RH and discusses dewpoint measurement.
Guide to adjusting the display's contrast level.
Options for controlling the display backlight based on light conditions.
Sets data logging to overwrite old data or stop when memory is full.
View current data logging status, saved data amount, and start time.
Procedure to initiate data logging and select logging intervals.
Instructions on how to stop data logging and preserve recorded data.
Steps to resume logging after power interruptions or battery changes.
Details on establishing PC connection for data download and logger configuration.
Step-by-step guide to setting the device's internal clock time.
Procedure for setting the current date on the device.
Explains how to change the date display format (DMY/MDY).
Method to hide or unhide the clock display on the device screen.
Information on replacing the device batteries and recommended types.
Details on connecting an optional external mains power supply.
How to check the internal software version of the device.
Procedure for checking and calibrating the humidity sensor.
Description of the humidity calibration kit components and usage.
Procedure for checking and adjusting the temperature sensor offset.
General| Accuracy | ±(1% of reading + 0.5% of range) (DC); ±(2% of reading + 1% of range) (AC) |
|---|---|
| Dimensions | 160 x 80 x 36 mm |
| Weight | 270 g |
| Display | LCD |
| Power Supply | Battery |
| Resolution | 0.1 dB |
To Next Page