Warmly remind:
(1) By default,the motherboard supports EDP1,EDP2 pins,does not support LVDS pin.
The EDP2 conflicts with LVDS.You can choose one of the EDP2,LVDS,but not both.If you need LVDS,please tell us to
change the motherboard in advance.
(2)
EDP1 is 30pins,it uses an integrated screen&backlight cable;
EDP2 is 20pins,it uses independent screen cable,backlight cable.
(3) The motherboard supports optional 2*COM,4*COM.By default,the COM1,COM2,COM3,COM4 only support RS232.
(4) The 9th pin of COM1/COM2/COM3/COM4 supports output optional 0V , 5V ,12V by JPCOM1/JPCOM2/JPCOM3
/JPCOM4 jumper setting.
By default,the COM1,COM2 have 0V.
(5) The motherboard only has 1*USB3.0 port.In the blue USB interface,the above is the USB2.0 interface,and the
bottom is the USB3.0 interface.The black USB interfaces are USB2.0 ports.
(6) By default,the Mini-PCIE slot has PCIE,USB signals.
(7) By default,the MSATA slot has SATA,USB signals.The MSATA slot supports changing the SATA signal to the PCIE
signal.Please note that the SATA signal will not exist after the change.If you need PCIE signal for MSATA slot,please
tell us in advance.
(8) By default,the motherboard is fanless,if you need fan cooling,please contact us to change in advance.
(9) The motherboard only supports 1*RJ45 LAN port,does not support 2*LAN,POE port.
(10) Please use the correct voltage. Excessive voltage will burn the motherboard.
(11) Please use enough current.If the current is insufficient, it will not work, and even cause crashes, restarts, blue
screens and other problems.
(12) Provide CCC, ISO 9001: 2015, MSDS,China certificate for energy conservation product certificates.
(13) All product specifications are subject to change without notice.
To Next Page
Loading...
