ELSKY EM218 - Chapter One The Motherboard specifications

- 3 -
Chapter One The Motherboard specifications
Form Factor
Standard Thin-ITX,170*170*18mm(L*W*H)
Processor
EM218:Support Intel Celeron dual cores J1800 CPU;
EM219:Support Intel Celeron quad cores J1900 CPU;
EM229:Support Intel Pentium quad cores J2900 CPU.
Chipset
Intel Bay trail SOC Chipset
Cooling
Heat sink(Fanless,passive cooling);
Optional thin silent cool fan.
Supply
1*DC_JACK1 interface
DC port:5.5*2.5mm; Support 12V;
The motherboard full load power consumption is about 25W;
Recommend 12V 5A / 7A / 10A power adapter.
1*DC_PWR1 interface
Memory
1*SODIMM1 slot
1*NB-DDR3 1600MHz 1.35V Memory slot,Max. 8GB RAM.
Ethernet
1*RJ45 LAN interface
Realtek 8111H 10/100/1000Mbps RJ45 LAN port;
Wake-on-LAN and PXE diskless boot function.
1*MINI_PCIE interface
Support optional WIFI/Bluetooth/3G/4G/GPS,etc.
Display
Integrated Intel HD Graphics in CPU;
Support single display,dual display copy/expansion,single display in DOS.
1*VGA DB15 interface
Support Max. Resolution 1920*1200@60Hz
1*VGA_H1 pin
Support Max. resolution 1920*1200@60Hz (12Pin,1*12Pin,2.0mm)
1*EDP1 pin
Support Max. resolution 1920*1080@60Hz (30Pin,2*15Pin,2.0mm)
1*EDP1_PWR pin
EDP1 voltage control pin (3Pin,1*3Pin,2.54mm)
1*EDP2 pin
Support Max. resolution 1920*1080@60Hz (20Pin,2*10Pin,2.0mm)
1*LVDS2 pin
Support Max. resolution 1920*1080@60Hz (30Pin,2*15Pin,2.0mm)
1*LVDS_PWR2 pin
LVDS/EDP2 voltage control pin (6Pin,2*3Pin,2.0mm)
1*INVERT pin
LVDS/EDP2 backlight control pin (6Pin,1*6Pin,2.0mm)
USB
1*USB3.0 interface
Rear standard USB3.0 interface
3*USB2.0 interfaces
Rear standard USB2.0 interface
1*F_USB2 pin
Front USB2.0 pin;One group has 2*USB2.0 (9Pin,2*5Pin,2.54mm)
1*F_USB3 pin
Front USB2.0 pin;One group has 2*USB2.0 (9Pin,2*5Pin,2.54mm)
Sound
Integrated Realtek ALC662 HD digital audio decoder,6-channel high-fidelity audio controller.
1*LINE_OUT interface
Support Audio output
1*MIC_IN interface
Support Microphone input
1*JAMP1 pin
This is the amplifier pin. It supports 8Ω 5W speaker dual channel output.
(4Pin,1*4Pin,2.0mm)
1*F_AUDIO1 pin
Standard Audio pin (9Pin,2*5Pin,2.54mm)
Hard Disk
1*SATA1 interface
Standard SATA2.0 hard disk interface
1*MSATA slot
Mini SATA2.0(MSATA) SSD slot
1*SATA_PWR pin
It is hard disk power supply pin and can take the 5V,12V electricity.
(4Pin,1*4Pin,2.54mm)
Switch
1*F_PANEL1 pin
Switch, power supply light, hard disk light, restart pin.
(9Pin,2*5Pin,2.54mm)
Parallel Port
1*JLPT1 pin
Standard printer interface pin (25Pin,2*13Pin,2.0mm)
Serial Port
1*COM1 interface
Support standard RS232;Not support RS422/RS485
1*COM2/3/4 pin
Support standard RS232;Not support RS422/RS485. (9Pin,2*5Pin,2.54mm)
1*JPCOM1/2/3/4 pin
Control the 9th pin of the COM1/2/3/4 to choose optional 0V/5V/12V.
(6Pin,2*3Pin,2.0mm)
1*PS/2 pin
Standard PS/2 interface pin (7Pin,1*7Pin,2.0mm)
1*SIM_CARD1 slot
Support SIM card. A SIM card is required when using 3G/4G function.