Eltek Valere Theia He-t User Manual

10 User Manual THEIA HE-t String Inverters 357115.013, Issue 1.0, 2011 March
The upper cover may only be removed by Eltek Valere authorized personnel. Removal of the
upper cover by unauthorized persons voids the warranty!
The lower cover protects the customer connection area, and may be removed by the system
installer for electrical connection and maintenance of the inverter.
Figure 2.4.5: Lower cover
Removing the lower cover:
• Remove the four screws on the lower
cover with a 4 mm hex key.
• Take the cover off carefully.
• Store the lower cover and screws safely
to avoid loss or damage.
Fastening the lower cover:
• Fasten the screws on the lower cover
with a torque of 1.0 Nm / 0.74 ft-lbf.
DANGER: Always disconnect the power sources prior to removal of the
lower cover!
The inverter is charged with high voltages, and removal of the lower cover can have
lethal consequences if the inverter is not disconnected.
CAUTION: Never remove the inverter lower cover in wet conditions!
Removal of the inverter lower cover during rain or in damp conditions can damage
sensitive internal electronic components.
photovoltaikforum.com

Eltek Valere Theia He-t Specifications

General

Brand	Eltek Valere
Model	Theia He-t
Category	Inverter
Language	English