User Manual THEIA HE-t String Inverters 357115.013
,
Issue 1.0, 2011 April
61
address assigned to the HE-t. With this completed it should now be possible to reach the
HE-t webserver by typing in the external IP address of the local network.
• The external IP address of the local network can be found by visiting
http://www.whatismyip.com.
NOTICE!
If the local network is assigned a dynamic IP address from their Internet Service Provider
(ISP) the external IP address is unlikely to remain constant over a long time period. It is
possible to set up a free account with DynDNS, or other similar companies, who will provide
the user with a ‘normal’ web address that is linked to the IP address of the local network. In
order for the DynDNS service to operate correctly the user’s router must be capable of
reporting its IP address to the DynDNS service. This will be present in a section of the router
asking for the details for the users account with DynDNS. If the user’s router does not have
this functionality and has a dynamic IP address then periodically a manual update of the
DynDNS settings will be required.
6.4. Internal Web Server
The inverter has an internal, onboard web server providing detailed information about the
operation, warnings/alarms and energy production.
Figure 6.3.5: THEIA Analyzer web page
• Changes can be done in Setup > Plant Setup.
• Default administrator account is: User: admin, Password: admin
• This should be changed if the web server is connected to the internet. The web page is best
viewed in Firefox 4.0 or Internet Explorer 8.0.
photovoltaikforum.com
To Next Page
Loading...
Need help?
General