Eltek Valere Theia He-t User Manual

64 User Manual THEIA HE-t String Inverters 357115.013, Issue 1.0, 2011 March
this User Manual and the inverter is
shielded from direct sunshine
- Clean ventilation (See 8.2.7.
Ventilation)
Low inverter
temperature(W/A)
Low internal inverter
temperature
- Contact your distributor
Current / power limitation
(W/A)
PV power exceeds
inverter rating
- The inverter will try to start up
again when the temperature is
within the permissible range again
- Check if the ventilation is
sufficient, the minimum distances
are compliant with those stated in
this manual and the inverter is
shielded from direct sunshine
- Clean ventilation (See 8.2.7.
Ventilation)
Communication failure (A) Internal communication
failure
- If the inverter is in Shutdown, turn
off the AC side and then the DC
side. Wait for 30 seconds, then turn
on the AC side and then the DC
side
- If the fault persists, contact your
distributor
Fan failure (W/A) Internal air circulation has
failed
- Contact your distributor for
replacement
Fuse fault (A) One or more fuses or
circuit breakers are blown
- Contact the system installer for
replacement
Active power limitation
(W/A)
*
Reactive power
compensation (W/A)
*
Microprocessor fault
(W/A)
- If the inverter is in Shutdown, turn
off the AC side and then the DC
side. Wait for 30 seconds, then turn
on the AC side and then the DC
side
- If the fault persists, contact your
distributor
Ground current trip (A)
*
High AC voltage (A) Too high AC voltage, the
inverter stops feeding
power
- The inverter will restart when the
voltage is within the permissible
range
- Check that the country settings
have been successfully set in Setup
> Grid Setup
- If the failure persists, contact the
system installer
photovoltaikforum.com

Eltek Valere Theia He-t Specifications

General

Brand	Eltek Valere
Model	Theia He-t
Category	Inverter
Language	English