BA-en-3031-2004_KNH35 29
4.6 Specific operating parameters for the high voltage output
The high voltage outputs may be operated in either the current constant or
the voltage constant mode.; i.e. a previously defined voltage or a
previously defined current is kept constant also if the operating conditions
alternate within the operating limits.
Note:
In the current constant mode the transient time is significant more slowly
than in the voltage constant mode.
Fig. 18:
output-specific
operating
parameters
Z01105e_a
Main menu
Setup
Password
HV output
Operating mode
Ramp time
Limitation type
Limit
Max. setpoint
Ext. setpoint
Autostart
Release mode
Limit. signal
Release source
Operating mode
operating mode
voltage constant
To Next Page
Loading...
