What to do if my ELTEX Portable Generator cannot be switched on?
If your ELTEX Portable Generator won't switch on, it might be due to a defective fuse or an overloaded device. Replace the fuse, ensuring you use the correct type as indicated on the nameplate. Also, check the number of connected devices to prevent overloading. Another possible cause is that the supply voltage isn't connected. Make sure to connect or activate the supply voltage.
What to do if my ELTEX Portable Generator fails to supply high voltage?
If your ELTEX Portable Generator fails to supply high voltage, the device might be defective. In this case, you should notify Eltex Service.
Symbols indicating risks (warning, caution, EX) in the manual.
Requirements for protecting against contact with live components.
Manufacturer's right to change specifications without prior notice.
Mounting instructions for wall or table placement of the generator.
Requirements for grounding the generator and cable specifications.
Steps for powering on and initial operation of the unit.
How to adjust output voltage using the rotary button.
Maintenance checks for the generator, cooling fins, and cables.
Cleaning procedures for charging bars and handling solvents.
Technical specifications for the KNH18/D variant.
General| Voltage (V) | 230 |
|---|---|
| Frequency (Hz) | 50 |
| Fuel Type | Gasoline |
| Fuel Tank Capacity (L) | 25 |
| Engine Type | 4-stroke, OHV |
To Next Page
