EasyManua.ls Logo

ELTEX KNH18 - Warranty; Troubleshooting

ELTEX KNH18
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BA-en-3018-2006_KNH18 19
6. Warranty
The units are warranted for a period of 12 months provided that the opera-
ting conditions have been maintained, that the units have not been tam-
pered with and that the units show no mechanical damage.
The warranty applies only if the operating and assembly instructions spe-
cified by Eltex have been observed. The warranty period begins on the
date of delivery.
In the event of defects occurring during the warranty period, the units or
defective components will be repaired at Eltex. Defective components will
be replaced and installed free of charge.
If repairs are required at the customer's premises, the costs for sending a
technician (travel, travel time, expenses) will be charged to the customer.
7. Troubleshooting
Warning!
Electric shock hazard!
Do not carry out any maintenance or repair work without first switching
off the high voltage generator and disconnecting the supply voltage.
The machine which has the units fitted must not be in operation.
Repairs and maintenance work must be carried out by qualified person-
nel only.
Defect/Error Defect/Cause Remedy
Generator cannot be
switched on.
Defective fuse.
Device overloaded.
Supply voltage not
connected.
Replace fuse, (fuse
type see nameplate).
Check the number of
consumers.
Connect or activate
supply voltage.
Generator fails to
supply high voltage.
Device defective. Notify Eltex Service.

Related product manuals