BA-en-3031-2004_KNH35 33
This option allows the operator to select whether the generator is to switch
on the high voltage after the mains power supply has been disrupted or
whether the high voltage is to be switched on manually.
Warning!
If <YES> has been selected for automatic runup, high voltage is available
immediately after the supply voltage to the generator is switched on.
If the current or voltage limit is reached, the generator may transmit a sig-
nal during limiting. This signal will be transmitted to the status relay which
will drop when reaching the limit.
Automatic runup after mains failure
autostart ON
NO
Limiting signal
limit. signal
No
To Next Page
Loading...
