Eltorque QT Series User Manual

Technical Details
User Manual QT250 and QT800, ID 2021 2.0 July 2018
Page 53 of 86
Figure 36: Analogue level and flow control.
Note! The accuracy of an actuator with analog interface is +/- 5%, (if the control signal
is 12 mA/ 50%, the valve position is in the range of 45-55%).
If a higher accuracy is needed, please consider a CANbus interface with accuracy
of +/- 0.5% instead.

Eltorque QT Series Specifications

General

Brand	Eltorque
Model	QT Series
Category	Controller
Language	English