48 Troubleshooting - ENGLISH
TROUBLESHOOTING
The machine does not start
The problem can have different causes. Follow the instructions for the suggested causes to solve the problem.
Fuse blown, or circuit breaker has tripped
• Replace fuse or reset circuit breaker.
• Disconnect any other appliances connected to the same circuit as the dishwasher.
Machine is not connected to the power supply
Connect the power cord to the power outlet.
Machine is not turned on
Turn on the machine.
Water pressure is low
1. Check that the water supply is connected properly.
2. Check that the the water is turned on.
Door of dishwasher not properly closed
Close the door properly and latch it.
Water is not pumped out of dishwasher
The problem can have different causes. Follow the instructions for the suggested causes to solve the problem.
Twisted or trapped drain hose
Check the drain hose.
Filter clogged
Check the coarse filter.
Kitchen sink clogged
Check the kitchen sink to make sure it is draining well. If the problem is due to a blocked kitchen sink, you may need to call
a plumber rather than a dishwasher service technician.
Residue, deposits and stains
Suds in the tub
The problem can have different causes. Follow the instructions for the suggested causes to solve the problem.
Wrong detergent
1. Run the Rapid programme without any dishes.
2. Check for suds and repeat if needed.
To Next Page
Loading...
Need help?
General
