66 Installation - ENGLISH
1. To adjust the rear foot, use a cross-head screwdriver and turn the screw.
2. To adjust the front feet, use a flat-head screwdriver and turn the front feet.
You can also turn the front feet by hand.
NOTE! The maximum adjustment height of the feet is 60mm with the longer feet.
3. Use a spirit level to check if the dishwasher is perfectly level and adjust the feet again if needed.
CAUTION! The dishwasher must not be tilted more than 2°.
Adjust the door spring tension
The door springs are set at the factory to the correct tension for the outer door.
To Next Page
Loading...
Need help?
General
