elvita CIH4330S User Manual (English)

Questions and Answers:

C
Cassandra TorresAug 6, 2025
What to do if my elvita CIH4330S Hob heating stops and shows 'u'?
- R
  Ronald WilliamsAug 6, 2025
  If your Elvita hob heating stops suddenly during operation and the display flashes 'u', it could be due to several reasons. First, ensure you are using the correct type of pan as specified in the instruction manual. It's possible the pan diameter is too small. Also, the cooker may have overheated; allow it to cool down and then press the 'ON/OFF' button to restart the unit. If the issue persists, the pan detection circuit might be damaged, requiring the power board to be replaced.
J
Jeremy CarpenterAug 10, 2025
Why doesn't the LED come on when I plug in my elvita CIH4330S?
- J
  James CastilloAug 10, 2025
  If the LED on your Elvita hob doesn't come on when you plug it in, there could be a few reasons. First, check if the plug is correctly inserted into the power socket and that the socket is working. There might be a connection failure between the accessory power board and the display board, so inspect that connection. If those aren't the problem, the accessory power board or the display board might be damaged and need replacement.
K
kimberly11Aug 15, 2025
What to do if my elvita CIH4330S Hob shows cooking mode but doesn't heat?
- N
  nathanmathisAug 15, 2025
  If the cooking mode indicator on your Elvita hob comes on, but heating doesn't start, it could be due to a few reasons. The hob temperature might be too high. Check whether the fan runs smoothly; if not, replace it. Alternatively, the power board could be damaged and require replacement.
K
Kimberly HendersonAug 19, 2025
Why does the fan motor on my Elvita hob sound abnormal?
- P
  pughjosephAug 19, 2025
  If you notice the fan motor on your Elvita hob sounds abnormal, it's likely that the fan motor is damaged and needs to be replaced.
J
Jesse KnoxAug 25, 2025
Why are some buttons not working on my Elvita hob?
- B
  Benjamin DoughertyAug 25, 2025
  If some buttons on your Elvita hob do not work, or the LED display is not functioning normally, it is possible that the display board is damaged and requires replacement.
J
jarvisjosephAug 28, 2025
Why does my Elvita hob display 'u' on heating zones?
- W
  wardjacobAug 28, 2025
  If heating zones on the same side of your Elvita hob (like the first and second zone) display 'u', it could indicate a connection failure between the power board and the display board, so check the connection. It's also possible that the communication section of the display board is damaged, requiring replacement. Another potential cause is a damaged main board, which would mean replacing the power board.
M
mullinswilliamSep 1, 2025
What does E3/E4 mean on my elvita CIH4330S Hob?
- S
  Samantha ZhangSep 1, 2025
  If your Elvita hob displays E3 or E4, it means the temperature of the ceramic glass plate is too high. Please restart the hob after it cools down.

elvita CIH4330S Specifications

General

Type	Induction Hob
Number of Cooking Zones	4
Power Supply	220-240V, 50/60Hz
Total Power	7400 W
Control Type	Touch Control
Weight	10.5 kg
Material	Glass Ceramic
Safety Features	Child Lock
Dimensions (WxDxH)	590 x 520 mm