Vertical
Horizontal
• Reset of all parameters to default factory settings
Press to start the procedure to reset the switchboard configuration. The reset confirmation screen is displayed
(see below): press
to proceed or to cancel and maintain the current configuration.
The reset does not affect contacts lists and event lists, which will be retained in the device memory.
Reset default factory settings
Reset confirmation request
• Installer PIN
Press to start the procedure to change the installer PIN (required to access to the advanced settings menu).
In the next screen, enter four digits. Press
to confirm or press to cancel without saving.
Default: 1234.
Installer PIN
PIN setting
To Next Page
Loading...
Need help?
General
