What does Err 09 mean on EMAK Lawn Mower?
Err 09 on your EMAK Lawn Mower indicates that the ECU detects an incorrect status of the engine solenoid valve output. To address this, switch the ignition off and back on to position 1.
Why EMAK EF 105 Lawn Mower engine does not start?
The EMAK Lawn Mower engine might fail to start due to several reasons: a lack of fuel (in this case, fill the tank, check the tank bleeding, and the fuel filter), poor or contaminated fuel (always use fresh fuel from clean containers and clean the carburettor), a contaminated air filter (clean the air filter according to the engine manufacturer's instructions), no ignition spark (clean or replace the spark plug, check the ignition cable and system), or too much fuel in the engine combustion chamber (unscrew and dry off the spark plug).
What to do if EMAK EF 105 Lawn Mower starter does not work?
If the starter of your EMAK Lawn Mower isn't working, it could be due to a flat or weakly charged starter battery (charge the starter battery), a malfunctioning safety switch on the operator’s seat (sit correctly or the switch is defective), a faulty safety switch on the brake pedal (press the brake pedal down fully), the mower mechanism being switched on (switch off the mower mechanism), a blown fuse on the (+) cable of the starter battery (check and replace the fuse if necessary), grass that is too long or wet (correct the cutting height and move back to clear the mower mechanism), or a blocked discharge channel/mower deck (clean the discharge channel/mower deck after stopping the engine and removing the ignition key).
What to do if EMAK Lawn Mower fill level display does not respond?
If the fill level display on your EMAK Lawn Mower isn't responding, it's likely due to mown grass stuck to the fill level display lever. Remove the mown grass and ensure the lever can move freely.
What does Err 01 mean on EMAK EF 105 Lawn Mower?
Err 01 on your EMAK Lawn Mower indicates that the seat switch ECU detects an invalid status of the seat switch. To resolve this, switch the ignition off, then apply and release load from the seat several times.
What does Err 02 mean on EMAK Lawn Mower?
Err 02 on your EMAK Lawn Mower means that the ECU detects an invalid status of the brake switch. To fix this, switch the ignition off and then back on to position 2.
What to do if EMAK EF 105 engine is flooded?
If your EMAK Lawn Mower's engine is flooded after you've tried starting it several times, remove the spark plug, dry it thoroughly, and then screw it back in. This should help resolve the issue.
What does Err 10 mean on EMAK Lawn Mower?
Err 10 on your EMAK Lawn Mower means that the ECU detects an incorrect status of the ignition coil output. To resolve this, switch the ignition off and back on to position 1.
What does Err 08 mean on EMAK EF 105?
Err 08 on your EMAK Lawn Mower means that the ECU detects an incorrect status of the start relay output. To fix this, switch the ignition off and back on to position 1.
What does Err 06 mean on EMAK Lawn Mower?
Err 06 on your EMAK Lawn Mower indicates that the ECU detects an invalid status of the discharge channel switch. To fix it, switch the ignition off and back on to position 2, then remove and reinstall the discharge channel.
General| Brand | EMAK |
|---|---|
| Model | EF 105 |
| Category | Lawn Mower |
| Language | English |
Explains the manual's purpose and how to use it for safe operation.
Covers general safety rules, PPE, machine checks, and interpretation of warning symbols.
Lists and illustrates the primary parts of the lawn tractor, referencing Fig. 2 for visual aid.
Describes the dashboard, ignition switch, pilot lights, and control levers.
Explains the function of speed adjustment pedals and the hydrostat transmission system.
Outlines forbidden operations and general guidelines for using the machine safely.
Critical instructions for maneuvering the tractor safely on inclines and uneven terrain.
Covers engine start/stop, driving, and grass cutting procedures for optimal performance.
Details safety measures and regular checks for engine, lubrication, and belts.
Guides on battery maintenance, charging, and servicing wheels and blades.
Instructions for attaching and safely using towed accessories and the towing hitch.
Provides technical data, conformity declarations, and warranty information.
Details the warranty period, coverage, limitations, and how to make a claim.
Diagnoses common issues with engine, transmission, and other functions.
To Next Page
