Then put the handle back in its seat,
guiding the cable as it automatically
rewinds.
4.22 A
CCELERATOR LEVEL
It regulates the rpm and stops the
engine.
The positions are indicated on the
plate showing the following symbols:
«OFF» for switching off the engine
«CHOKE» starting from cold
«SLOW» for minimum engine speed
«FAST» for maximum engine speed
– The «CHOKE» position enriches the mixture so must only be used for the
time necessary when starting from cold.
– When moving from one area to another, put the lever in a position between
«SLOW» and «FAST».
– When cutting, go to the «FAST» position.
EN 14 CONTROLS AND INSTRUMENTS
To Next Page