which is to be connected to the corresponding connector of the special “CB02”
maintenance battery charger supplied.
This connector must
only be used for connecting to the
“CB02” maintenance battery charger. For
its use:
– follow the instructions given in the rela-
tive instructions manual;
– follow the instructions given in the bat-
tery manual.
6.3 CHECKS AND ADJUSTMENTS
6.3.1 D
ISMANTLING, SHARPENING AND BALANCING THE BLADE
A badly sharpened blade tears at the grass, reduces collection and makes the
lawn turn yellow. To dismantle the blade, hold onto it tightly using work gloves and
loosen the two screws (1).
Sharpen the two cutting edges using a medi-
um grade grinding wheel and check the bal-
ance by holding the blade up with a round 18
mm Ø bar inserted in the central hole.
Always replace the
damaged or bent blade; never try to
repair it! ALWAYS USE MANUFAC-
TURER'S GENUINE REPLACEMENT
BLADES BEARING THE SYMBOL !
When assembling,
screw down the fixing bolts (1). If
necessary, replace the nuts and bolts
only with GENUINE SPARE PARTS.
!
WARNING!
!
WARNING!
IMPORTANT
EN 30 MAINTENANCE
To Next Page
Loading...
Need help?
General
