To learn how to drive interceptor start by driving it
line of sight (no goggles yet).
1.Turn on the remote control switch of radio, then
turn on the car.
2.Put the car on the frame or stand, If wheel is
running self-motion, adjust the turned to fine-tune
of the radio until the wheel is still.
3.Slip the trigger of transmitter slowly, you can
observe the car whether it can go ahead or go
back.
4.Turn steering regulating wheel of radio to left or
right, and make sure the steering of front wheels
follow the instruction.
5.Put the car on the ground and stand behind the
back of the car. Squeeze the throttle trigger of
radio gently. If the car does not move in a straight
line, you can adjust the turned to fine-tune of radio
until the car moves in a straight line.
Interceptor VTX Settings
Line of Sight driving
Vtx Schematic and Button Diagram
6
To Next Page
Loading...
Need help?
General
