Embertec ESUSAV8-ET-10C - What You Need to Know

Please read this instruction booklet before installing
your Embertec Emberstrip® 8AV+
• The Embertec Emberstrip® 8AV+ is an electrical device. Normal
safety precautions for use of an electrical device must be observed.
• Do not immerse the Embertec Emberstrip® 8AV+ in water.
• Needles, knives or any other metal or conductive item must not be
inserted into any Embertec Emberstrip® 8AV+ outlets.
• This device does not convert voltage. It must only be used with
appliances fitted with North American configuration electrical plugs
(2-pin or 3-pin) and rated at 110 – 120 V AC.
• Ensure the Embertec Emberstrip® 8AV+ is securely plugged into the
wall outlet to avoid it slipping out. Ensure cords plugged into the
Embertec Emberstrip® 8AV+ remain tangle free.
• It is recommended to regularly inspect the Embertec Emberstrip® 8AV+
for damage. The Embertec Emberstrip® 8AV+ must not be used if it
shows any signs of damage.
• This Embertec Emberstrip® 8AV+ is for indoor use only. Do not use
outdoors. Do not use this Embertec Emberstrip® 8AV+ for anything
other than its intended use. Misuse may cause injury or death.
• In normal use, this device intermittently emits a green flashing light.
People who experience photosensitive epilepsy or other forms of
photosensitivity should exercise caution when using the device.
• The outlet on the side of your Embertec Emberstrip 8AV (called
an RJ11 outlet) is for connection of your Classic Sensor only. It is
NOT for connection of a phone, LAN communication device or
any other equipment.
What you need to know
7