embrava Blynclight User Manual

EMBRAVA Installation Guide for SRV Canada VRS
Congratulations on your purchase of the Embrava Blynclight.
If you ever had to wait in front of your computer for a call, you know how frustrating it can be.
No more!
The Embrava Blynclight flashes when you have an incoming Canada VRS call. You can choose
from several blinking colors and from models that use a wire (short distance) or wireless where
you can even be notified from the next room!
This guide will walk you through the steps of setting up your Embrava Blynclight.
I. Unpack and Connect your Embrava Blynclight
1. Unpack the device from its packaging.
2. Connect the USB cable from your device into an available USB port on your PC.
3. (Optional) Peel off the protective coating from one side of the mount adhesive and attach
the adhesive to the bottom of the Blynclight device or mount. Ensure surfaces are clean
and free of dust before applying adhesive.
4. (Optional) Peel off the protective coating from the other side of the mount adhesive and
place your Blynclight device or mount in an appropriate position in view of your
surrounding colleagues. Ensure surfaces are cleaned and apply approximately 10
seconds of pressure when attaching mount to a surface.
Embrava Installation Guide
February 11, 2021

embrava Blynclight Specifications

General

Connectivity	USB
Power Source	USB powered
Compatibility	Windows, macOS, Linux
Color Options	RGB
Features	Customizable colors
Control	Software control

Summary

Unpack and Connect Embrava Blynclight

Unpack Device

Remove the Embrava Blynclight device from its packaging.

Connect USB Cable

Connect the USB cable from the Blynclight device to an available USB port on your PC.

Apply Mount Adhesive (Device Side)

Peel and attach protective coating from one side of mount adhesive to the Blynclight or mount.

Mount Blynclight Device

Peel and attach the other side of the mount adhesive to place the Blynclight in view.

Download Embrava Connect Software

Download Software from Website

Download the latest Embrava Connect software from the official website for your OS.

Initiate Software Download

Click the blue 'Download' button to begin downloading the software.

Install Embrava Connect Software

Locate and Open Installer

Find the downloaded installer file in your download folder and select 'Open'.

Run Installation Program

Click on the Embrava Connect installer file to start the installation process.

Start Setup Wizard

Begin the setup wizard and proceed to the license agreement screen.

Accept License Agreement

Read the license agreement and click 'I Agree' to continue the installation.

Allow Installation Changes

Grant permission for the installer to make changes to your computer.

Complete Installation

Confirm successful installation and that Embrava Connect will run immediately.

Configure Application Connections

Select applications like SRV Canada VRS for the Embrava device to connect with.

Manage Connection Priority

Set application priority and uncheck unused connections for the device.

Access System Tray Configuration

Access Embrava Connect settings by clicking its icon in the system tray.

Customize Blynclight Colors

Change Blynclight colors for notifications like incoming calls via Embrava Connect.

Embrava Connect for Mac Installation

Download Mac Software

Download the latest Embrava Connect software for Mac from the official website.

Start Mac Installation

Double-click the Embrava Connect installer to begin the installation on Mac.

Accept Mac License Agreement

Review and agree to the license terms for the Mac Embrava Connect software.

Select Mac Installation Destination

Choose the disk where the Embrava Connect software will be installed on Mac.

Complete Mac Installation

Proceed with the installation and confirm its successful completion.