EMC-PARTNER CDN2000-06-25 User Manual

E-CDN2000-06-25-E-Manual 1/54
User Manual CDN2000-06-25
Coupling Network for:
Surge: 1.2/50µs up to 6 kV and 8/20 current up to 3 kA
Ring Wave: up to 6 kV
EFT: up to 4.4 kV, common and differential mode
Damped Oscillatory Wave: up to 3kV
Title: CDN2000-06-25 Coupling Network
Date: 16.07.99
Division Manager: M. Lutz
Quality Manager: R. Henz
Revised 06. May 2011
Three Phase Coupling Decoupling Network - Manually Operated
For EFT, SURGE, RING WAVE, OSCI Coupling
Filter and
overcurrent trip
Supply input
Supply output
Switch field coupling
impedance and path
Ls ON/OFF

EMC-PARTNER CDN2000-06-25 Specifications

General

Brand	EMC-PARTNER
Model	CDN2000-06-25
Category	Test Equipment
Language	English

Summary

1 Description of the CDN2000-06-25

1.1 Applications of the CDN2000-06-25

Details applications for Surge, Ring Wave, EFT, and Damped Oscillatory Waves.

1.1.1 CWG Combination Wave Generator

Explains the CWG test standard and its importance for powered tests.

1.1.2 Ring Wave Test 0.5 µs / 100 kHz

Describes the Ring Wave test, its causes, and parameters.

1.1.3 Electric Fast Transient 5/50 ns

1.1.4 Damped Oscillatory Wave 100 kHz or 1 MHz

1.2 Impulse Testers Usable with CDN2000-06-25

1.3 Technical Data

1.3.1 CDN2000-06-25 Specifications

Provides technical specifications for SURGE, EFT, and Damped Oscillatory Wave.

2 Safety Information

2.1 Safety Standards Compliance

Lists safety standards met by the CDN2000-06-25.

2.2 Climatic Conditions for Operation

2.3 Precautions During Use

Provides essential safety rules for operating the device.

2.4 Electromagnetic Compatibility Immunity

5 Preparation for Operation

5.3 Checks Before Operation

Pre-operation checks and setup procedures.

5.3.1 Optical Verification of CDN2000-06-25

5.3.2 EUT Power Supply Connection

5.3.3 I/O Lines Coupling Setup

5.3.4 SURGE Coupling Setup

Details the setup procedure for SURGE coupling.

5.3.5 Ring Wave Coupling Setup

Describes how to set up Ring Wave coupling.

5.3.6 EFT Coupling Setup

Explains the setup for EFT coupling.

5.3.7 Damped Oscillatory Coupling Setup

Details the setup for Damped Oscillatory coupling.

6 Testing with the CDN2000-06-25

6.1 Quickstart for TRA or MIG with CDN2000-06-25

Provides a quick start guide for using the CDN2000 with TRA/MIG testers.

6.1.1 MIG0603Inx Operation with CDN2000-06-25

Specific steps for operating MIG0603Inx with the CDN2000.

7 Maintenance and Servicing

7.1 Maintenance Procedures

7.2 User Verification of CDN2000-06-25

7.2.1 Combination Wave Tester Verification

7.2.2 Ring Wave Tester Verification

8 Actions After Failed Operation

8.1 Service and Repairs

Guidelines for service and repairs of the CDN2000-06-25.

8.3 Varistor Damage Hints

8.3.2 Post-Varistor Destruction Actions

10.2 Correction Notes

10.2.1 TRA2000 with CDN2000 SURGE Synchronization

Synchronization of TRA2000 with CDN2000 for SURGE tests.

13.4 Wire Connection: MIG0603OMI and CDN2000-06-25