To Next PageTo Next Page
Need help?Do you have a question about the EMC-PARTNER TRA3000 S and is the answer not in the manual?
General| Brand | EMC-PARTNER |
|---|---|
| Model | TRA3000 S |
| Category | Test Equipment |
| Language | English |
Essential safety rules and precautions during TRA3000 operation, including high voltage warnings.
Identifies the main elements of the TRA3000 F-S-D-V-C front panel.
Identifies the main elements of the TRA3000 F-S-D-V-C front panel.
Details connections and warnings on the TRA3000 F-S-D-V-C rear panel.
Instructions for connecting EUT power, including internal variac and DC supply.
Guides for quick start, language selection, protocol options, and parameter editing.
A step-by-step guide for quickly starting tests with the TRA3000.
Explanation of RUN mode, trigger functions, and changing values during operation.
Guide to customizing and defining test parameters for various EMC tests.
Technical specifications for ESD tests using the EXT-TRA3000 E accessory.
Technical specifications for EFT tests with the EXT-TRA3000 F accessory.
Technical specifications for SURGE tests based on IEC 61000-4-5 Ed.2.
Technical specifications for interruption and variation tests with internal Variac.
Technical specifications for interruption and variation tests with external Variac.
Technical specifications for the EFT coupling/de-coupling network.
Technical specifications for DIPS circuits on DC power ports per IEC 61000-4-29.
Overview of control functions available for test setup and execution.
Essential safety rules and precautions for operating the TRA3000, including high voltage warnings.
Function of the Emergency Stop input and its effect on testing.
Input for detecting EUT passed/failed status during EMC tests.
Explanation of RUN mode, trigger functions, and changing values during operation.
Performing EFT tests and adjusting parameters during operation.
How to perform ESD tests and adjust voltage parameters.
Performing SURGE tests and monitoring voltage/current.
Performing DIPS and Variation tests on the EUT power.
Procedures for accessing service functions and uploading firmware.
Steps to customize the protocol header with company logo and operator name.
Managing protocol storage, including deleting and autodeleting old protocols.
Procedures for users to verify the TRA3000's output pulses using an oscilloscope.
Lists error messages related to incorrect inputs and their causes.
Lists error messages related to generator running problems and potential causes.
Lists hardware error messages and troubleshooting steps.
Different methods for performing a system reset (software).
Structure and syntax of the TRA3000 remote control commands.
Detailed list of available remote control commands and their arguments.
