EMC-PARTNER TRA3000 S - Trigger Output and Control Functions; Control Functions Overview

TRANSIENT3000
28/162
1.3.13 Trigger Output Levels
1.3.14 Control
Set-up memory Up to 200 test set-ups can be stored
Test sequences the set-ups can be linked serially
Ramps automatic linear variation of one parameter e.g. voltage, frequency
etc.
Synchronisation on different power
line frequencies
10 up to 400 Hz
Impulse release Manual or automatic
Failure detection on EUT -External Input EUT failed
-Manual detection
-Selectable limit value for impulse voltage and current for SURGE
Safety switching Emergency stop
Switch off the EMC Test and the EUT power
Control of an external variac separate remote-control output
Failure analysis report, servicing USB port with USB stick. USB stick delivered with TRA3000
Control of external CDN via RS 485 port
Remote control from GENECS Ethernet
Remote control customized program RS232
t
V
1 ms 150 ns
EUT Power
ON
SURGE
EFT
DIPS1 DIPS2
EUT Power
OFF
5
V
10
V
2
1
3
2 Trigger level 9 V for triggering only
DIP1
1 Tri
gg
er level 7 V interference
3 Tri
gg
er level 3 V Power ON/OFF